+ 256 200929953
+ 256 393194384
WATER - KEY PRODUCTS
AQUASAFE WSL20
Our simple emergency response kit is able to test for the basic water testing parameters set out by the World Health Organisation (WHO), namely pH, free chlorine, total chlorine, turbidity, temperature and faecal (thermotolerant) coliforms.
Its small, single buoyant case format allows easy carriage and fast deployment and can withstand the challenges of fieldwork. A single incubator with easy to use soft key digital controls. Adjustable temperature setting allows for the incubation of faecal (thermotolerant) coliforms. The number of petri-dishes used can now be varied, up to a maximum of 20, without compromising performance through use of the PetriLok® system. This maintains stability of smaller numbers of dishes during transport. A high performance rechargeable battery pack is built in to the case behind a hinged panel allowing easy access when required. This pack includes an inbuilt docking station for the incubator, allowing easy removal of samples when required.
AQUASAFE WSL25+
The AquaSafe Water Safety Laboratory WSL25 Pro represents the evolution of the next generation of portable water safety laboratories. The lightweight kit has been optimised for field use. Microbiological testing has been revolutionised with our high-capacity single incubator incorporating PetriLok® technology for simplified sample handling. The novel lightweight hard anodised aluminium membrane filtration unit offers a screw-in multi-position funnel for ease of sterilisation.
The single chamber incubator incorporates Trace2o®’s innovative PetriLok® cartridge technology, enabling a variable stack of petri dishes to be handled with ease. Fully flexible temperature control allows incubation of total and faecal coliforms, as well as a variety of other standard microbiological parameters. The incubation system is powered by a high-performance removable 170W durable rechargeable battery pack, which is built into the case, with mains and vehicle charging capacity. The waterproof case incorporates our unique incubator docking station, for enhanced portability. The AquaSafe WSL25 Pro includes the waterproof (IP68) HydroCheck HC1000 multi-parameter meter, and waterproof (IP68) HydroTest HT1000 photometer, as well as equipment for arsenic testing. All necessary equipment is neatly housed in one easily transportable waterproof case, for efficient field sampling.
AQUASAFE WSL50 PRO
The AquaSafe Water Safety Laboratory WSL50 Pro represents the evolution of the next generation of portable water safety laboratories. The lightweight kit has been optimised for field use. Microbiological testing has been revolutionised with our high-capacity dual incubator incorporating PetriLok® technology for simplified sample handling. The novel lightweight hard anodised aluminium membrane filtration unit offers a screw-in multi-position funnel for ease of sterilisation.
​​
Dual chamber incubator
The lightweight dual chamber incubator is extremely space-efficient, with a single control panel to operate both chambers. The incubator incorporates Trace2o®‘s innovative PetriLok® cartridge technology, enabling a variable stack of petri dishes to be handled with ease. Independent temperature controls for each chamber allow simultaneous incubation for both total and faecal coliforms, as well as a variety of other standard microbiological parameters. Each chamber features an separate built-in timer and can run entirely independently if required. The incubation system is powered by a high-performance removable 170W durable rechargeable battery pack, which is built into the case, with mains and vehicle charging capacity. The waterproof case incorporates our unique incubator docking station, for enhanced portability. All necessary equipment is neatly housed in one easily transportable waterproof case with wheels, for efficient field sampling.
​
CLICK HERE for a demonstration of the AquaSafe double incubator.
​
CLICK HERE to see the AquaSafe membrane filtration at work.
AQUASAFE MSL25 PRO
Seamlessly integrating with pre-existing photometric and electrochemical analysis equipment, the AquaSafe Microbiological Safety Laboratory MSL25 is the optimum compact solution to microbiological testing. The lightweight single incubator incorporates PetriLok® cartridge technology, enables a variable height stack of petri dishes to be handled with ease in the field. The high-performance removable rechargeable battery pack is housed in a compact waterproof carry case, with integrated incubator docking station for incubation on the go. The AquaSafe MSL25 is the ideal tool for water safety engineers looking to expand their capabilities to include smaller scale microbiological testing.
AQUASAFE MSL50
For water analysis professionals with existing photometric and electrochemical analysis equipment, the AquaSafe Microbiological Safety Laboratory MSL50 is the perfect companion, offering the reliable dual incubator, with PetriLok® cartridge technology, enabling a variable stack of petri dishes to be handled with ease. With independent temperature controls for the dual chambers, as well as the high-performance removable 170W durable rechargeable battery pack, all housed in a waterproof carry case with incubator docking station for incubation on the go, the AquaSafe MSL50 is the ideal tool for water safety engineers looking to expand their capabilities to include microbiological testing.
​
CLICK HERE for a demonstration of the AquaSafe double incubator.
METALYSER® PORTABLE HM1000
A lightweight portable heavy metals analysis system, offering accessories and consumables for up to ten possible parameters in a single waterproof hard-shell carry case.
​
The intelligent handheld unit can calculate results from a single-point standard addition with ease, offering an inexpensive yet powerful screening tool for the field.
​
CLICK HERE for HM1000 setup.
​
CLICK HERE for a demonstration of sample analysis.
​
METALYSER® DELUXE HM2000
An enhanced portable heavy metals analysis system, with a combination of electrochemical and photometric instruments for improved ranges and additional parameters. The Metalyser® offers easy field detection of cadmium, lead, zinc, mercury and arsenic, as well as low-range copper and manganese. The Metalometer offers high-range copper and manganese, whilst adding aluminium, boron, iron, chromium (VI) and nickel. Dual technologies offer a flexible solution for heavy metal screening applications.
​
METALYSER® FIELD PRO HM3000
A professional portable heavy metals analysis system, combining the reliable Metalyser® handheld unit with a high-quality waterproof 10 inch tablet PC, offering enhanced levels of precision. The tablet PC permits multi-point standard addition analysis, and with the manual peak height calculation function, peaks can be measured that automatic techniques cannot detect. The spreadsheet function can average data, calculate correlation coefficients, draw best fit lines and calculate the original sample concentration. With these tools the field user can detect levels as low as 1ppb with confidence. With a range of 16 possible parameters, the HM3000 is an extremely powerful instrument for field heavy metal analysis.
​
CLICK HERE for HM3000 setup.
​
CLICK HERE for a demonstration of sample analysis.
METALYSER® HM4000
A lightweight portable heavy metals analysis system, offering accessories and consumables for up to six possible parameters in dual waterproof hard-shell carry cases, separating digestion equipment from analysis equipment for more effective operation. The intelligent handheld unit can calculate results from a single-point standard addition with ease, offering an inexpensive yet powerful screening tool for the field.
​
CLICK HERE for more information.
LABORATORY HM5000
A complete professional laboratory voltammetry research system, allowing full control over the range of electrochemical parameters. The bespoke software offers the user complete control of full capabilities of the potentiostat, including a variety of voltammetric scan parameters and stripping techniques. Designed by electrochemists, for electrochemists, the innovative HM5000 Benchtop instrument incorporates an automated sample elevation platform, compact electrochemical cell, as well as built-in nitrogen purging capability, with gas inlet valve and regulator controlling flow directly to the cell. With no costly installation prerequisites and no need for toxic mercury drops, the HM5000 is the ideal tool for undergraduates, post-graduates and experienced researchers alike.
ARSENOMETER HMAS100
The Trace2o® Arsenometer® is a fully portable kit that allowes analysis of a water sample on site, detecting levels as low as 1ppb of arsenic. The lightweight, waterproof unit is capable of speciation between Arsenic (III) and Arsenic (V) within 10 minutes without the use of prohibited substances such as mercuric bromide, making the process safer and faster for the user. The tests produce no plastic waste that can harm the environment and the kit comes complete with all reagents required for 200 tests.
​
CLICK HERE for more information.
MAJI-LITE
The Maji-Lite is a portable single-parameter meter which has the ability to measure any one of 8 common parameters. The accompanying electrodes are fully interchangeable making the Maji-Lite highly versatile. The sensor is housed in a rugged and pocket-sized aluminium body meaning it is an ideal solution for measuring water quality in the field.
​
The socket can house any of the 8 optical electrodes, which are:
Turbidity, Chlorophyll, Blue Green Algae (fresh water), Blue Green Algae (salt water), Rhodamine, Fluoescein, CDOM/FDOM and Refined Oil (hydrocardbons).
MAJI-1000
The Maji-1000 is the smaller of our multi-parameter probes which allow additional electrodes to be added. It comes with the 10 standard Maji parameters included and offers the ability to add 1 ISE and 1 Optical electrode of your choice. This means 12 parameters can be measured simultaneously.
Just like all of our other portable Maji Probes, it is supplied as a package meaning you have everything you need to start testing.
MAJI-3000
The Maji-3000 is our largest and most advanced multiparameter probe which comes with the 10 standard Maji parameters included, and offers the ability to add up to 6 unrestricted electrodes. This means the Maji-3000 is capable of measuring up to 16 individual parameters simultaneously.
The Maji-3000 is ideal for long-term deployment due to its automated sensor cleaning system, however it can equally be used as a portable device for those who need high parameter, portable testing.
MAJI-SONDE
The Maji-Sonde is an all-in-one multi-parameter device, which features built-in data logging, internal power and a sensor cleaning system. This means it is ideal for discrete long term deployment, using only a Kevlar deployment cord without the need for cables or auxiliary equipment at ground level. The Maji-Sonde measures the 10 standard parameters and has the ability to add up to 6 unrestricted additional electrodes. The internal lithium-ion batteries used in the Maji-Sonde are able to provide up to 180 days of continuous logging, and the internal memory has the ability to store up to 150,000 full data sets. Whenever you need to retrieve your water quality data, simply pull the Maji-Sonde out from the water and connect to a PC.
​
Logging regimes are configured using the PC/laptop software included. Full features include:
- Retrieval of logged data
- Full calibration of the instrument with report generation
- Logged data output to spreadsheet and text files
- Setup utility
- Site name and GPS geotagging
MAJI-STAT
The Maji-Stat is an all-in-one fixed site monitoring system with the ability to monitor up to 16 parameters simultaneously. It is an ideal solution for continuous monitoring of boreholes, rivers and dams.
The system uses a self-cleaning Maji-3000 probe permanently fixed in the water course by a 10m cable for continuous logging with minimal maintenance. Also included is a solar-powered data hub with battery, a data telemetry system and one-year access to our online data management hub. This results in a fully self-sustaining system where data is automatically collected, recorded, transmitted and displayed online with no human interaction.
​
Existing infrastructure can be used to house the data hub, probe and solar panel or Wagtech Projects can provide bespoke solutions tailored to the specific location. Full installation, commissioning and training is available upon request.
DATA EARLY WARNING MANAGEMENT SYSTEM (DEWMS)
In response to the global need for improved Hydromet systems for mitigating the damaging effects of climate-induced hazards, Wagtech Projects/Trace2o offers a Data Early Warning Management System (DEWMS) available with the Maji-Stat. This software not only acts as a flood early warning system, but it also provides analysis of your water quality data.
Full features include:
- Early warning alerts when water levels exceed specified limits
- Water level and quality data analysis via a purpose-built cloud-based platform
- Visualisation of data in charts, maps and graphs for the identification of problem areas
- Calibration management to ensure timely maintenance of water level and quality equipment